Prices & bookings
All services can be booked online with us. For special requests or for a pick-up and drop-off service, please contact us right away by phone or by contact form.
Car detailing exterior and interior
Consultation
Level 1
(exterior, interior)
(exterior, interior)
Level 2
(interior)
(interior)
Level 3
(exterior, interior, wheels)
(exterior, interior, wheels)
Do you have special requests or would you like to learn more about our services?
To find the right offer for you, we offer you a non-binding consultation at our premises. Book your desired appointment online.
To find the right offer for you, we offer you a non-binding consultation at our premises. Book your desired appointment online.
Exterior and Interior
Duration 1.5 days with window sealing curing time (incl. 7.7% VAT)
656 CHF
Level 1
Exterior:
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- Hand dry all components with silicone free and absorbent microfiber towels
Interior:
- Clean out interior (all items are put into a tote bag).
- Carpets are removed
- Floor, carpets, trunk and spare wheel well are vacuumed
- Floor, carpets and trunk are steam cleaned to remove superficial soiling
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
Special:
- Ceramic coating of front window, driver and passenger side windows
Steam Wash recommendation
Level 1 is a basic cleaning for all vehicles that do not have heavy soiling.
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- Hand dry all components with silicone free and absorbent microfiber towels
Interior:
- Clean out interior (all items are put into a tote bag).
- Carpets are removed
- Floor, carpets, trunk and spare wheel well are vacuumed
- Floor, carpets and trunk are steam cleaned to remove superficial soiling
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
Special:
- Ceramic coating of front window, driver and passenger side windows
Steam Wash recommendation
Level 1 is a basic cleaning for all vehicles that do not have heavy soiling.
Interior detailing
Duration 2 days incl. drying time of the materials (incl. 7.7% VAT)
1070 CHF
Level 2
- Clear out the interior (all items are placed in a carrier bag).
- Carpets are removed
- floor, trunk and spare wheel well are vacuumed
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
- Floor, carpets, trunk are shampooed with special cleaning brushes and then steam vacuumed.
(stains and deep dirt are removed)
- Cleaning of the roof lining (according to the customer's wishes with chemicals or biological cleaning agents)
- Odor neutralization in the interior without the use of ozone (chemical-free and health-friendly)
- Dog hair removal (if available)
- Seat belts are cleaned and disinfected
(dirt trap for skin sweat, coffee and food stains)
- Sun visors are cleaned
- Make-up mirrors
- Ventilation ducts are steam cleaned and disinfected
- Plastic parts in the interior are cleaned and maintained
- Leather cleaning in the interior (if available) with specially developed leather brushes
Steam Wash recommendation
Level 3 is recommended for company cars, second-hand cars, family cars, smokers' cars or drivers with four-legged friends.
- Carpets are removed
- floor, trunk and spare wheel well are vacuumed
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
- Floor, carpets, trunk are shampooed with special cleaning brushes and then steam vacuumed.
(stains and deep dirt are removed)
- Cleaning of the roof lining (according to the customer's wishes with chemicals or biological cleaning agents)
- Odor neutralization in the interior without the use of ozone (chemical-free and health-friendly)
- Dog hair removal (if available)
- Seat belts are cleaned and disinfected
(dirt trap for skin sweat, coffee and food stains)
- Sun visors are cleaned
- Make-up mirrors
- Ventilation ducts are steam cleaned and disinfected
- Plastic parts in the interior are cleaned and maintained
- Leather cleaning in the interior (if available) with specially developed leather brushes
Steam Wash recommendation
Level 3 is recommended for company cars, second-hand cars, family cars, smokers' cars or drivers with four-legged friends.
Exterior and Interior, wheels
Duration 4 days with curing time of the wheels coating (incl. 7.7% VAT)
2180 CHF
Level 3
Exterior:
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- Hand dry all components with silicone free and absorbent microfiber towels
Interior:
- Clean out interior (all items are put into a tote bag).
- Carpets are removed
- Floor, trunk and spare wheel well are vacuumed
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
- Floor, carpets, trunk are shampooed with special cleaning brushes and then steam vacuumed.
(stains and deep dirt are removed)
- Cleaning of the roof lining (according to the customer's wishes with chemicals or biological cleaning agents)
- Odor neutralization in the interior without the use of ozone (chemical-free and health-friendly)
- Dog hair removal (if available)
- Seat belts are cleaned and disinfected
(dirt trap for skin sweat, coffee and food stains)
- Sun visors are cleaned
- Make-up mirrors
- Ventilation ducts are steam cleaned and disinfected
- Plastic parts in the interior are cleaned and maintained
- Leather cleaning in the interior (if available) with specially developed leather brushes
- Engine compartment cleaning after cover removal
Special
- Ceramic coating of rims, inner wall of rims and brake caliper incl. dismounting
Steam Wash recommendation
The Level 3 is a combination of the Level 1 and 2 package and is especially suitable for car enthusiasts.
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- Hand dry all components with silicone free and absorbent microfiber towels
Interior:
- Clean out interior (all items are put into a tote bag).
- Carpets are removed
- Floor, trunk and spare wheel well are vacuumed
- Door panels are cleaned
- Disinfection of the entire interior
- Key surrounds and vents are cleaned with extra soft detailing brushes
- Cockpit and center console are dusted and cleaned with detergent
- Storage compartments in the interior are cleaned
- Windows and mirrors are cleaned
- Glove compartment is vacuumed
- Pedals are cleaned
- Floor, carpets, trunk are shampooed with special cleaning brushes and then steam vacuumed.
(stains and deep dirt are removed)
- Cleaning of the roof lining (according to the customer's wishes with chemicals or biological cleaning agents)
- Odor neutralization in the interior without the use of ozone (chemical-free and health-friendly)
- Dog hair removal (if available)
- Seat belts are cleaned and disinfected
(dirt trap for skin sweat, coffee and food stains)
- Sun visors are cleaned
- Make-up mirrors
- Ventilation ducts are steam cleaned and disinfected
- Plastic parts in the interior are cleaned and maintained
- Leather cleaning in the interior (if available) with specially developed leather brushes
- Engine compartment cleaning after cover removal
Special
- Ceramic coating of rims, inner wall of rims and brake caliper incl. dismounting
Steam Wash recommendation
The Level 3 is a combination of the Level 1 and 2 package and is especially suitable for car enthusiasts.
Ozone-free disinfection and odor neutralization
Ozone is a colorless to slightly bluish irritant gas (O3) that has a pungent odor in higher concentrations. High ozone exposures cause irritation of the respiratory tract in humans and animals. If used incorrectly, there is a risk that materials in the vehicle interior will be attacked and damaged. We protect not only our health, but also that of our customers. Steam Wash deliberately avoids the use of ozone equipment!
Ceramic coating
Bronze
Silver
Gold
Platinium
Bronze - 2 years warranty
Duration approx. 2-5 days incl. natural curing process (incl. 7.7% VAT)
from 1699 CHF
Cleaning:
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 1 coat of Ceramic Pro 9H (ceramic sealant, protective layer)
- 1 coat Ceramic Pro Top Coat (high gloss, water repellent)
- 1 coat Ceramic Pro Glass (windshield, driver and passenger side windows)
Additive:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 1 coat of Ceramic Pro 9H (ceramic sealant, protective layer)
- 1 coat Ceramic Pro Top Coat (high gloss, water repellent)
- 1 coat Ceramic Pro Glass (windshield, driver and passenger side windows)
Additive:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Silver- 4 years warranty
Duration approx. 5-8 days incl. natural curing process (incl. 7.7% VAT)
from 2299 CHF
Cleaning:
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 2 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats Ceramic Pro Wheels & Caliper (rims from the outside)
- 1 layer Ceramic Pro Glass (windshield, driver and passenger side windows).
Additive:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
- Steaming off car with max. 20 bar steam pressure and steam gun.
- Steam cleaning with specially developed shampoo to loosen road dirt such as insects, bird droppings etc. (highly concentrated cleaning solution based on polymers and at the same time PH neutral)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 2 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats Ceramic Pro Wheels & Caliper (rims from the outside)
- 1 layer Ceramic Pro Glass (windshield, driver and passenger side windows).
Additive:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Gold - Lifetime warranty
Duration approx. 8-12 days incl. natural curing process (incl. 7.7% VAT)
from 4299 CHF
Includes the level 2 package
Cleaning:
- Steam cleaning of car with max. 20 bar steam pressure and steam gun
- Steam cleaning with specially developed shampoo to dissolve road dirt such as insects, bird droppings, etc. (highly concentrated polymer-based cleaning solution and PH neutral at the same time)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 4 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats Ceramic Pro Wheels & Caliper (rims and brake caliper incl. disassembly)
- 1 layer Ceramic Pro Glass (windshield, windows driver and passenger side)
Addition:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Cleaning:
- Steam cleaning of car with max. 20 bar steam pressure and steam gun
- Steam cleaning with specially developed shampoo to dissolve road dirt such as insects, bird droppings, etc. (highly concentrated polymer-based cleaning solution and PH neutral at the same time)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 4 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats Ceramic Pro Wheels & Caliper (rims and brake caliper incl. disassembly)
- 1 layer Ceramic Pro Glass (windshield, windows driver and passenger side)
Addition:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Platinium - Lifetime warranty
Duration approx. 12-14 days incl. natural curing process (incl. 7.7% VAT)
from 5799 CHF
Includes the level 2 package
Cleaning:
- Steam cleaning of car with max. 20 bar steam pressure and steam gun
- Steam cleaning with specially developed shampoo to dissolve road dirt such as insects, bird droppings, etc. (highly concentrated polymer-based cleaning solution and PH neutral at the same time)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 6 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats total interior depending on existing material (plastic, leather, fabric etc.)
- 2 coats Ceramic Pro Wheels & Caliper (rims and brake caliper incl. disassembly)
- 1 layer Ceramic Pro Glass (windshield, windows driver and passenger side)
Addition:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Cleaning:
- Steam cleaning of car with max. 20 bar steam pressure and steam gun
- Steam cleaning with specially developed shampoo to dissolve road dirt such as insects, bird droppings, etc. (highly concentrated polymer-based cleaning solution and PH neutral at the same time)
- Car rinsed with a combination of steam and distilled water
- rims are sprayed with an acid-free cleaner
- Clean rims with extra soft detailing brushes
- Rims thoroughly steamed off
- Steam cleaning with max. 140 degrees Celsius of hard-to-reach areas (door folds, hinges, etc., if accessible with steam gun)
- Shampooing, cleaning and degreasing behind the fuel filler flap with detailing brushes
- All components are dried by hand with silicone-free and absorbent microfiber cloths
paint correction - correction factor 70-80
- Rims are covered to prevent polishing dust
- A 1 to 2 step paint correction is performed from component to component (no intensive scratch removal)
- After each layer the components are cleaned with polish remover
Ceramic coating
- Decontamination/degreasing of the paint surfaces
- Adhesive primer
- 6 coats of Ceramic Pro 9H (ceramic sealant, protective layer)
- 2 coats Ceramic Pro Top Coat (high gloss, water repellent)
- 2 coats total interior depending on existing material (plastic, leather, fabric etc.)
- 2 coats Ceramic Pro Wheels & Caliper (rims and brake caliper incl. disassembly)
- 1 layer Ceramic Pro Glass (windshield, windows driver and passenger side)
Addition:
Each vehicle paint is as individual as its own owner. Depending on the condition of the paint and personal wishes, there is the possibility of a 3 to 5 step paint correction. In this process an intensive scratch removal is carried out and a correction factor of 95% is achieved. Please book a free consultation so that we can assess the condition of the paint.
Need advice ?
Especially with ceramic Coating, a consultation including a paint check makes sense. We would be happy to invite you for a coffee with us.
Unsere Referenzen
Ferrari, Lamborghini, Bentley, McLaren, Rolls Royce, Porsche, Mercedes, BMW, Audi & Mehr
© 2022 Steamwash GmbH
Adresse
- Steam Wash GmbH
- Summelenweg 93
- 8808 Pfäffikon SZ
- info@steamwash.ch
- Tel. 041 741 06 06
ÖFFNUNGSZEITEN
BEITRÄGE UND REFERENZEN
Wie erkennt man eine hochwertige Keramikversiegelung?
Liebe Kunden
Auf dem Markt befinden sich mittlerweile unzählige Hersteller von Keramikversiegelungen. Einige können auch von Privatpersonen über Online Shops bezogen werden. Wir möchten Sie davor bewahren eine falsche Kaufentscheidung zu machen. Hier erfahren Sie, wie Sie eine High-End Keramikversiegelung von 2-in-1 Produkten unterscheiden können.
Auf dem Markt befinden sich mittlerweile unzählige Hersteller von Keramikversiegelungen. Einige können auch von Privatpersonen über Online Shops bezogen werden. Wir möchten Sie davor bewahren eine falsche Kaufentscheidung zu machen. Hier erfahren Sie, wie Sie eine High-End Keramikversiegelung von 2-in-1 Produkten unterscheiden können.